Vivado中Block Design常见错误总结

Error1.[BD 41-1356] Address block </processing_system7_0/S_AXI_HP0/HP0_DDR_LOWOCM> is not mapped into </axi_vdma_0/Data_MM2S>. Please use Address Editor to either map or exclude it.

修改方法.
a、点击Address Editor.

b、在Address Editor页面右击失败的接口，选择 Auto Assign Address（自动分配地址）即可成功解决.
ps.这步我已经完成，所以Auto Assign Address按钮变成灰色。

Error2.[[BD 41-238] Port/Pin property POLARITY does not match between /adwave_0/rst_n(ACTIVE_LOW) and /reset_rtl_0(ACTIVE_HIGH).

修改方法.
a、选中相应的模块
b、点击Properties,点击CONFIG选项

c、点击RESET_TYPE类型，将电平修改为ACTIVE_LOW