STM32 HAL库模板（二）：OLED显示功能使用详解

说明：

使用时只需要更改OLED.h中的oled_i2c的宏定义即可（hal库的硬件IIC，用stm32cubemax生成即可）

OLED.C

#include "OLED.h"
#include "ascii.h"
#include "stdio.h"

void WriteCmd(unsigned char I2C_Command)//写命令
{
   HAL_I2C_Mem_Write(&oled_i2c,OLED0561_ADD,COM,I2C_MEMADD_SIZE_8BIT,&I2C_Command,1,100);
}

void WriteDat(unsigned char I2C_Data)//写数据
{
       HAL_I2C_Mem_Write(&oled_i2c,OLED0561_ADD,DAT,I2C_MEMADD_SIZE_8BIT,&I2C_Data,1,100);
}
   void OLED_Init(void)
{
   HAL_Delay(100); //这里的延时很重要

   WriteCmd(0xAE); //display off
   WriteCmd(0x20);   //Set Memory Addressing Mode
   WriteCmd(0x10);   //00,Horizontal Addressing Mode;01,Vertical Addressing Mode;10,Page Addressing Mode (RESET);11,Invalid
   WriteCmd(0xb0);   //Set Page Start Address for Page Addressing Mode,0-7
   WriteCmd(0xc8);   //Set COM Output Scan Direction
   WriteCmd(0x00); //—set low column address
   WriteCmd(0x10); //—set high column address
   WriteCmd(0x40); //–set start line address
   WriteCmd(0x81); //–set contrast control register
   WriteCmd(0xff); //亮度调节 0x00~0xff
   WriteCmd(0xa1); //–set segment re-map 0 to 127
   WriteCmd(0xa6); //–set normal display
   WriteCmd(0xa8); //–set multiplex ratio(1 to 64)
   WriteCmd(0x3F); //
   WriteCmd(0xa4); //0xa4,Output follows RAM content;0xa5,Output ignores RAM content
   WriteCmd(0xd3); //-set display offset
   WriteCmd(0x00); //-not offset
   WriteCmd(0xd5); //–set display clock divide ratio/oscillator frequency
   WriteCmd(0xf0); //–set divide ratio
   WriteCmd(0xd9); //–set pre-charge period
   WriteCmd(0x22); //
   WriteCmd(0xda); //–set com pins hardware configuration
   WriteCmd(0x12);
   WriteCmd(0xdb); //–set vcomh
   WriteCmd(0x20); //0x20,0.77xVcc
   WriteCmd(0x8d); //–set DC-DC enable
   WriteCmd(0x14); //
   WriteCmd(0xaf); //–turn on oled panel
}

void OLED_SetPos(unsigned char x, unsigned char y) //设置起始点坐标
{
   WriteCmd(0xb0+y);
   WriteCmd(((x&0xf0)>>4)|0x10);
   WriteCmd((x&0x0f)|0x01);
}

void OLED_Fill(unsigned char fill_Data)//全屏填充
{
   unsigned char m,n;
   for(m=0;m<8;m++)
   {
       WriteCmd(0xb0+m);       //page0-page1
       WriteCmd(0x00);       //low column start address
       WriteCmd(0x10);       //high column start address
       for(n=0;n<128;n++)
           {
               WriteDat(fill_Data);
           }
   }
}

void OLED_CLS(void)//清屏
{
OLED_Fill(0x00);
}

void OLED_ON(void)
{
   WriteCmd(0X8D); //设置电荷泵
   WriteCmd(0X14); //开启电荷泵
   WriteCmd(0XAF); //OLED唤醒
}

void OLED_OFF(void)
{
   WriteCmd(0X8D); //设置电荷泵
   WriteCmd(0X10); //关闭电荷泵
   WriteCmd(0XAE); //OLED休眠
}

// Parameters : x,y — 起始点坐标(x:0~127, y:0~7); ch[] — 要显示的字符串; TextSize — 字符大小(1:6*8 ; 2:8*16)
// Description : 显示codetab.h中的ASCII字符,有6*8和8*16可选择
void OLED_ShowStr(unsigned char x, unsigned char y, char ch[], unsigned char TextSize)
{
   unsigned char c = 0,i = 0,j = 0;
   switch(TextSize)
   {
       case 1:
       {
           while(ch[j] != '\0')
           {
               c = ch[j] – 32;
               if(x > 126)
               {
                   x = 0;
                   y++;
               }
               OLED_SetPos(x,y);
               for(i=0;i<6;i++)
                   WriteDat(F6x8[c][i]);
               x += 6;
               j++;
           }
       }break;
       case 2:
       {
           while(ch[j] != '\0')
           {
               c = ch[j] – 32;
               if(x > 120)
               {
                   x = 0;
                   y++;
               }
               OLED_SetPos(x,y);
               for(i=0;i<8;i++)
                   WriteDat(F8X16[c*16+i]);
               OLED_SetPos(x,y+1);
               for(i=0;i<8;i++)
                   WriteDat(F8X16[c*16+i+8]);
               x += 8;
               j++;
           }
       }break;
   }
}

// Parameters : x,y — 起始点坐标(x:0~127, y:0~7); N:汉字在.h中的索引
// Description : 显示ASCII_8x16.h中的汉字,16*16点阵
void OLED_ShowCN(unsigned char x, unsigned char y, unsigned char N)
{
   unsigned char wm=0;
   unsigned int adder=32*N;
   OLED_SetPos(x , y);
   for(wm = 0;wm < 16;wm++)
   {
       WriteDat(F16x16[adder]);
       adder += 1;
   }
   OLED_SetPos(x,y + 1);
   for(wm = 0;wm < 16;wm++)
   {
       WriteDat(F16x16[adder]);
       adder += 1;
   }
}

// 这是自己写的显示中文字符串的函数，要先把中文字符串“共阴——列行式——逆向输出”取字模后存入ascll.h相应的位置(连续存入)
//传入参数分别为：x:起始横坐标
//                               y：纵坐标(填入0-7)
//                               begin:填入的中文字符串的第一个字在我们ascll.c字库里面的序号
// num:我们要填写几个字
// 比如要填“测试”，取完字模存入后这两个字在字库中序号为0,1,横坐标0，纵坐标第二行，就填：x：0，y：2，begin：0，num：2
void OLED_ShowCN_STR(u8 x , u8 y , u8 begin , u8 num)
{
   u8 i;
   for(i=0;i<num;i++){OLED_ShowCN(i*16+x,y,i+begin);} //OLED显示标题
}

// Parameters : x0,y0 — 起始点坐标(x0:0~127, y0:0~7); x1,y1 — 起点对角线(结束点)的坐标(x1:1~128,y1:1~8)
// Description : 显示BMP位图
void OLED_DrawBMP(unsigned char x0,unsigned char y0,unsigned char x1,unsigned char y1,unsigned char BMP[])
{
unsigned int j=0;
unsigned char x,y;

if(y1%8==0)
       y = y1/8;
else
       y = y1/8 + 1;
   for(y=y0;y<y1;y++)
   {
       OLED_SetPos(x0,y);
for(x=x0;x<x1;x++)
       {
           WriteDat(BMP[j++]);
       }
   }
}

void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size)
{
   unsigned char c=0,i=0;
       c=chr-' ';//得到偏移后的值
       if(x>128-1){x=0;y=y+2;}
       if(Char_Size ==16)
           {
           OLED_SetPos(x,y);
           for(i=0;i<8;i++)
           WriteDat(F8X16[c*16+i]);
           OLED_SetPos(x,y+1);
           for(i=0;i<8;i++)
           WriteDat(F8X16[c*16+i+8]);
           }
           else {
               OLED_SetPos(x,y);
               for(i=0;i<6;i++)
               WriteDat(F6x8[c][i]);

           }
}
u32 oled_pow(u8 m,u8 n)
{
   u32 result=1;
   while(n–)result*=m;
   return result;
}
//显示2个数字
//x,y :起点坐标
//len :数字的位数
//size:字体大小
//mode:模式   0,填充模式;1,叠加模式
//num:数值(0~4294967295);
void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size2)
{
   u8 t,temp;
   u8 enshow=0;
   for(t=0;t<len;t++)
   {
       temp=(num/oled_pow(10,len-t-1))%10;
       if(enshow==0&&t<(len-1))
       {
           if(temp==0)
           {
               OLED_ShowChar(x+(size2/2)*t,y,' ',size2);
               continue;
           }else enshow=1;
       }
      OLED_ShowChar(x+(size2/2)*t,y,temp+'0',size2);
   }
}

//浮点型
void OLED_ShowFNum(u8 x,u8 y,float num,u8 size2)
{
char Data[5];
sprintf(Data,"%3.2f",num); //保留小数点后2位小数，打印到Data数组中
OLED_ShowStr(x,y,Data,size2);//调用oled函数，在OLED屏上显示
}

OLED.h

#ifndef __OLED_H
#define __OLED_H

#include "i2c.h"

#define u8 uint8_t
#define u32 uint32_t

#define oled_i2c hi2c1 //I2c引脚

// 一些使用例子
//       OLED_ShowStr(0, 0, "hello world", 2);//显示字符串
//   OLED_ShowStr(0, 2, "hello world", 1);//显示字符串
//   OLED_ShowCN_STR(0, 4 , 0 , 8);
//       sprintf(num_temp_buffer,"show num:%0.2f",num);
//       OLED_ShowStr(0, 6, num_temp_buffer, 2);//显示字符串
//       OLED_CLS();
//       OLED_DrawBMP(0,0,128,7,BMP2);

#define OLED0561_ADD   0x78 // OLED的I2C地址（禁止修改）
#define COM               0x00 // OLED 指令（禁止修改）
#define DAT            0x40 // OLED 数据（禁止修改）

void WriteCmd(unsigned char I2C_Command);//写命令
void WriteDat(unsigned char I2C_Data);//写数据
void OLED_Init(void);//初始化
void OLED_SetPos(unsigned char x, unsigned char y);
void OLED_Fill(unsigned char fill_Data);//全屏填充0x00全清除，0xff全填充
void OLED_CLS(void);
void OLED_ON(void);
void OLED_OFF(void);
void OLED_ShowStr(unsigned char x, unsigned char y, char ch[], unsigned char TextSize);//显示字符串
void OLED_ShowCN(unsigned char x, unsigned char y, unsigned char N);//显示汉字
void OLED_DrawBMP(unsigned char x0,unsigned char y0,unsigned char x1,unsigned char y1,unsigned char BMP[]);//显示图片（取模：阴，列行，逆，输出索引，精简）

void OLED_ShowCN_STR(u8 x , u8 y , u8 begin , u8 num); //自己写的输出中文字符串
void OLED_ShowFNum(u8 x,u8 y,float num,u8 size2);

void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size);
u32 oled_pow(u8 m,u8 n);
void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size2);//size2(16|12)
#endif

ascii.h

#ifndef __ASCII_H
#define __ASCII_H

/***************************16*16的点阵字体取模方式：共阴——列行式——逆向输出*********/

unsigned char F16x16[] =
{
0x00,0x00,0xFE,0x12,0x92,0xB2,0xD2,0x92,0x92,0x92,0xD2,0xB2,0x9E,0x00,0x00,0x00,
0x40,0x30,0x0F,0x04,0x84,0x64,0x1F,0x04,0x04,0x04,0xFF,0x04,0x04,0x04,0x00,0x00,/*"屏",0*/

0x00,0x02,0x02,0xFA,0xAA,0xAF,0xAA,0xAA,0xAA,0xAF,0xAA,0xFA,0x02,0x02,0x00,0x00,
0x12,0x12,0x0A,0x7E,0x0A,0x0B,0x0A,0xFE,0x0A,0x2A,0x4A,0x3E,0x0A,0x12,0x12,0x00,/*"幕",1*/

0x10,0x60,0x02,0x8C,0x00,0xFE,0x02,0xF2,0x02,0xFE,0x00,0xF8,0x00,0xFF,0x00,0x00,
0x04,0x04,0x7E,0x01,0x80,0x47,0x30,0x0F,0x10,0x27,0x00,0x47,0x80,0x7F,0x00,0x00,/*"测",2*/

0x40,0x40,0x42,0xCC,0x00,0x90,0x90,0x90,0x90,0x90,0xFF,0x10,0x11,0x16,0x10,0x00,
0x00,0x00,0x00,0x3F,0x10,0x28,0x60,0x3F,0x10,0x10,0x01,0x0E,0x30,0x40,0xF0,0x00,/*"试",3*/

0x40,0x42,0xCC,0x00,0x00,0x44,0x54,0x54,0x54,0x7F,0x54,0x54,0x54,0x44,0x40,0x00,
0x00,0x00,0x7F,0x20,0x10,0x00,0xFF,0x15,0x15,0x15,0x55,0x95,0x7F,0x00,0x00,0x00,/*"请",4*/

0x20,0x22,0x2A,0x2A,0xAA,0x6A,0x3A,0x2E,0x29,0x29,0x29,0x29,0x29,0x20,0x20,0x00,
0x08,0x04,0x02,0x01,0xFF,0x55,0x55,0x55,0x55,0x55,0x55,0xFF,0x00,0x00,0x00,0x00,/*"看",5*/

0x00,0xFE,0x02,0x42,0x22,0x32,0x5E,0x92,0x52,0x32,0x12,0x02,0x02,0xFE,0x00,0x00,
0x00,0xFF,0x42,0x42,0x42,0x51,0x55,0x64,0x69,0x41,0x42,0x42,0x42,0xFF,0x00,0x00,/*"图",6*/

0x00,0x00,0x00,0xFE,0x20,0x20,0x20,0x20,0x20,0x3F,0x20,0x20,0x20,0x20,0x00,0x00,
0x00,0x80,0x60,0x1F,0x02,0x02,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x00,/*"片",7*/

};

/************************************6*8的点阵************************************/
const unsigned char F6x8[][6] =
{
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
   0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
   0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
   0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
   0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
   0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
   0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
   0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
   0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
   0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
   0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
   0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
   0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
   0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// –
   0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
   0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
   0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
   0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
   0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
   0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
   0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
   0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
   0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
   0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
   0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
   0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
   0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
   0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
   0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
   0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
   0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
   0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
   0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
   0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
   0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
   0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
   0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
   0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
   0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
   0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
   0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
   0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
   0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
   0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
   0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
   0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
   0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
   0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
   0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
   0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
   0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
   0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
   0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
   0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
   0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
   0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
   0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
   0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
   0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
   0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
   0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
   0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
   0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
   0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
   0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
   0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
   0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
   0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
   0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
   0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
   0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
   0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
   0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
   0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
   0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
   0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
   0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
   0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
   0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
   0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
   0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
   0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
   0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
   0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
   0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
   0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
   0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
   0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
   0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
   0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
   0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
   0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};
/****************************************8*16的点阵************************************/
const unsigned char F8X16[]=
{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};